PROJECT REVIEW
Drawing-led requirements are reviewed before manufacturing and quality-control planning.
Rotary shaft oil seals are reviewed by shaft and housing dimensions, speed, runout, pressure, lubricant, temperature, lip design and installation conditions.
Drawing-led requirements are reviewed before manufacturing and quality-control planning.
Geometry, service conditions, material direction and production feasibility are reviewed before quotation.
Reference images illustrate common oil seal profiles. Quotation review is based on your shaft, housing and operating data.
Drawings, samples and operating conditions help define a qualified review.
The production route is selected after geometry, material and quantity review.
Dimensions, appearance and any project-specific checks are agreed before production.
Send the seal or groove drawing with material, tolerance, speed, media and temperature requirements for project-specific review.
Lip direction and dust exclusion depend on the equipment and environment.
Additional lip functions are reviewed against contamination and lubrication needs.
Shaft, housing and installation dimensions define the design review.
These are application-review starting points, not blanket suitability claims. Final direction depends on the equipment and operating conditions.
Speed, lubricant, shaft condition and temperature guide seal review.
Shaft speed, runout and contamination conditions are considered together.
Media, pressure and shaft condition require application-specific review.
Duty cycle, temperature and installation conditions guide selection.
Dust, shock, lubricant and outdoor exposure affect seal direction.
Custom housing and shaft drawings support design and quotation review.
Material direction follows service media, temperature, load, motion, environment and documentation requirements. Final grade is confirmed per project.
A common starting point for mineral oils at moderate temperatures.
May suit higher heat, fuels or demanding lubricants.
May support higher-duty oil and mechanical conditions.
Friction, wear, speed and lubrication affect compound direction.
Case geometry and corrosion conditions should be defined.
Component configuration depends on the seal design and duty.
Each step converts application data into an agreed material, process, inspection and quotation scope.
Confirm shaft diameter, speed, runout and surface condition.
Check bore, width, installation direction and retention.
Define sealing and dust-exclusion functions.
Review lubricant, temperature, speed and environment.
Agree sample and installation evaluation requirements.
Manufacture the agreed seal configuration.
Check dimensions, lip condition and agreed project requirements.
Protect sealing lips and cases from deformation or damage.
Inspection requirements, tolerances and requested documentation must be agreed in writing for each project.
Critical dimensions and notes are identified before production.
The agreed material or grade is recorded for the project.
Surface and finishing criteria are agreed for the part.
Packing is selected to reduce deformation, contamination and handling risk.
A qualified review connects the drawing, operating condition, material direction, process route and inspection scope before price and lead time are confirmed.
Yes. Send the drawing, critical dimensions and operating conditions so feasibility can be reviewed before quotation.
MOQ depends on geometry, material, tooling or process route, and production quantity.
Lead time depends on tooling, sampling, material, inspection scope and order quantity.
Material direction can be reviewed from media, temperature, load, motion and environmental conditions.
A sample may support geometry and material discussion when complete drawings are unavailable.
Contact ASENPOWER before sending sensitive files so the handling requirement can be agreed.
Send a drawing, sample or application conditions for material, process and quotation review.
Send us your drawings, specifications or project requirements for engineering review.