ASENPOWERRUBBER & SEALING SOLUTIONSRequest a Quote ↗

PTFE vs FKM: Choosing Low-Friction Plastic or Fluoroelastomer Sealing Components

PTFE and FKM are often discussed together because both appear in demanding sealing applications. They are not substitutes in a simple one-to-one way. PTFE is a fluoropolymer with low friction and strong chemical resistance. FKM is an elastomer that provides rubber-like sealing behavior with strong resistance to heat and many fluids.

Basic Material Difference

PTFE is a plastic material known for low friction, chemical resistance and wide temperature capability. It does not behave like rubber. It has limited elasticity and usually depends on part geometry, energizers or hardware design to maintain sealing force.

FKM is a rubber material. It can compress, recover and seal through elastomeric deformation. It is commonly used for O rings, gaskets, molded seals and rubber components that need flexibility plus heat and chemical resistance.

Friction and Wear

PTFE is often selected when sliding friction must be low. It can be used in wear rings, guide components, backup rings, seats and machined sealing parts. Filled PTFE grades may improve wear resistance or dimensional stability for specific applications.

FKM can work in dynamic seals, but it generally produces more friction than PTFE. It may still be the better choice when elastic recovery is more important than low friction.

Chemical Exposure

PTFE has broad chemical resistance and is often reviewed when media are aggressive or uncertain. However, mechanical design remains important because PTFE does not provide the same compression recovery as rubber.

FKM resists many oils, fuels and chemicals, but compatibility must still be checked against the exact fluid. Some chemicals, amines, steam conditions or low-temperature requirements may require alternatives.

Sealing Behavior

FKM can seal with compression and rebound. This makes it suitable for O rings, molded rubber seals and static gaskets where the hardware compresses the part.

PTFE can seal effectively when the design supports it. It may need a spring, elastomer energizer or precision gland design. For dynamic applications, PTFE can reduce friction and stick-slip risk, but the design tolerance becomes more important.

Temperature Review

Both materials are used in elevated temperature environments, but the final choice depends on fluid, load, movement and hardware. Temperature should be reviewed as continuous operating temperature, not only short exposure peaks.

When PTFE Makes Sense

  • Low friction is a major requirement.
  • The part must resist broad chemical exposure.
  • The component is machined, thin-walled or used as a backup or wear part.
  • The design can support PTFE with proper geometry or energizing force.

When FKM Makes Sense

  • The design needs rubber-like compression and recovery.
  • The part is an O ring, gasket or custom molded seal.
  • Heat and oil resistance are required together.
  • The sealing groove is designed for elastomeric compression.

Related ASENPOWER Products

For plastic sealing components, review PTFE Components, PTFE Machined Parts and PTFE Sealing Components — historical URL; redirect implemented locally; not production-enabled. For rubber sealing, review O Rings and Custom Rubber Parts.

Engineering Review Checklist

Before finalizing a sealing part or rubber component, review the working environment, mating hardware, motion, pressure, temperature, media and inspection expectations together. A material that looks correct in a table can still fail if the groove, compression, surface finish or installation process is wrong.

For supplier review, prepare the drawing revision, 2D or 3D files, sample photos, material target, hardness, operating media, temperature range, annual quantity, prototype needs and any known failure history. If the current design is replacing an existing part, include the reason for replacement and any field issues observed by maintenance teams.

Send Drawings for Engineering Review

If your project requires a custom material, unusual geometry, non-standard tolerance or application-specific sealing performance, prepare drawings, samples, material notes and annual quantity estimates before requesting a quote. ASENPOWER can review custom rubber parts, hydraulic seals, PTFE components, O rings and industrial gaskets for OEM equipment programs.

Request a Quote or send your drawing for review.

Send us your drawings, specifications or project requirements for engineering review.

Send Your Drawing

General industry / literature reference only: temperature ranges, material comparisons and handbook fits (including h11, H8, Ra, hardness and chamfer) are confirmed per compound and project, not an ASENPOWER guarantee. Material recommendations are starting points for project review.